Planet IP DSLAM IDL-2400 User Manual page 293

GspanPlus15DB
gsannexctouqswitch
CUqSwitch6DB |
CUqSwitch6_5DB |
CUqSwitch7DB |
CUqSwitch8DB |
CUqSwitch9DB |
CUqSwitch10DB |
CUqSwitch11DB |
CUqSwitch12DB |
CUqSwitch13DB |
CUqSwitch14DB |
CUqSwitch15DB
atucminsnrmgntime
<atucminsnrmgntime-val>
atuccustomerid WorldWide |
France | China | Portugal
atucmpsdmasktype
Adsl2MEu64 | Adsl2MEu60 |
Adsl2MEu56 | Adsl2MEu52 |
Adsl2MEu48 | Adsl2MEu44 |
Adsl2MEu40 | Adsl2MEu36 |
Adsl2MEu32 | Adsl2MAll
atucgsseltloopgauge 26awg
| 24awg
atucconfrateratio
<atucconfrateratio-val>
Example:
$ get adsl line profile ifname dsl-0
IP DSLAM
Conexant parameter that is used to configure the switching point
between Annex C and G.Span Plus SUQ.(length = 4 bytes)
Type: Modify -- Optional
This parameter indicates the time when the snr margin violation is
allowed. After this time expires and current snr is less than min snr, the
DSL line is dropped by the APIs.
Type: Modify -- Optional
Valid values: 0 - 255
This parameter indicates the customer ID.
Type: Modify -- Optional
Conexant parameter that selects the PSD mask option to be used for
Adsl2M.
Type: Modify -- Optional
This parameter should be set to the expected loop gauge.
Type: Modify -- Optional
This parameter specifies the latency rate for both channels in a dual
latency configuration. This parameter must be set the parameter to a
value greater than 0 and less than 100.
Type: Modify -- Optional
Valid values: 0 - 100
293