Table of Contents
Advertisement
Output:
Verbose Mode On:
VLAN Version Number : 1
GVRP Status
Set Done
VLAN Version Number : 1
GVRP Status
Verbose Mode Off:
Set Done
Output Fields:
Field
Port Id
Port VLAN Index
Accept Frame Types
Ingress Filtering
Gvrp Status
Failed Registrations
Last Pdu Origin
Restricted Vlan
Registration
652
Current VLANS : 1000
: enable
Current VLANS : 1000
: enable
Description
The bridge port id.
The VLAN Identifier.
When this is Tagged, the device will discard untagged frames or
Priority-Tagged frames received on this port. When All, untagged
frames or Priority-Tagged frames received on this port will be
accepted and assigned to the PVID for this port.
When this is true, the device will discard incoming frames for VLANs,
which do not include this Port in its Member set. When false, the port
will accept all incoming frames.
The state of GVRP operation on this port. The value 'enable', indicates
that GVRP is enabled on this port, as long as 'gvrpstatus' in 'GVRP
INFO' command is also enabled for this device. When this is 'disable',
even if 'gvrpstatus' in 'GVRP INFO' command is 'enable' for the
device, GVRP will be 'disable' on this port. In such a case, any GVRP
packets received will be silently discarded and no GVRP registrations
will be propagated from other ports. This object affects all GVRP
Applicant and Registrar state machines on this port. This configuration
shall not be effective for a bridge port created over PPPOE/IPOE
interface.
The total number of failed GVRP registrations, for any reason, on this
port.
The Source MAC Address of the last GVRP message received on
this port.
The state of Restricted VLAN Registration on this port. If the value of
this control is true(1), then creation of a new dynamic VLAN entry is
IDL series User Guide
Advertisement
Table of Contents
