dstipaddrto
<dstipaddrto-val>
prototypefrom
<prototypefrom-val>
prototypeto
<prototypeto-val>
srcaddrcmp eq | neq |
lt |leq | gt | geq | any
|inrange | exrange
|ingenlist |
notingenlist
dstaddrcmp eq | neq |
lt |leq | gt | geq | any
|inrange | exrange
|ingenlist |
notingenlist
prototypecmp eq | neq
| lt| leq | gt | geq | any
432
End destination IP address of the range of destination IP
addresses. This field and 'dstipaddrfrom' specifiy a range of
destination IP addresses, if 'dstaddrcmp' is either 'inrange' or
'exrange'. Otherwise this field is invalid
Type: Create - Optional
Modify - Optional
Default value: 255.255.255.255
Start IP protocol type of the range of IP protocol types. This field
is invalid if 'prototypecmp' is 'any'.This field and 'prototypeto'
specify a range of IP protocol types, if 'prototypecmp' is either
'inrange' or 'exrange'.
Type: Create - Optional
Modify - Optional
Default value: 0
End IP protocol type of the range of IP protocol types.This field
and 'prototypefrom' specifiy a range of IP protocol types, if
'prototypecmp' is either 'inrange' or 'exrange'. Otherwise this field
is invalid.
Type: Create - Optional
Modify - Optional
Default value: 27
Source IP addresss comparison type. 'ingenlist' means check if
source ip address present in interface classifier generic list.
'notingenlist' means check if source ip address not present in
interface classifier generic list. 'ingenlist' and 'notingenlist' are
invalid if the direction of the rule for which this subrule is being
created is 'out'
Type: Create - Optional
Modify - Optional
Default value: any
Destination IP address comparison type. 'ingenlist' means check
if destination ip address present in interface classifier generic list.
'notingenlist' means check if destination ip address not present in
interface classifier generic list. 'ingenlist' and 'notingenlist' are
invalid if the direction of the rule for which this subrule is being
created is 'out'.
Type: Create - Optional
Modify - Optional
Default value: any
IP Protocol type comparison type.
Type: Create - Optional
IDL series User Guide