Dsl Dsp Chip Commands; Get Dsl Dsp Chip; Reset Dsl Dsp Chip - Planet IP DSLAM IDL-2400 User Manual

Output Fields:
FIELD Description
Identifies the chip to be build and initialized.
Chip Id
DSL Type Identifies the firmware to be downloaded.
Line coding ADSL line coding type. Not valid for SHDSL.
Adsl Tx Config Transmission capabilities with which the DSL system is configured. Its default value
depends on the Annex Type supported. Not valid for SHDSL.
Shdsl Tx Mode Annexure Type, specifies the regional settings for the SHDSL line. Only valid for SHDSL.

5.9.25 Dsl dsp chip Commands

5.9.25.1 Get dsl dsp chip

Description:
Use this command to get.
Command Syntax:
get dsl dsp chip [chipid <chipid-val>]

5.9.25.2 Reset dsl dsp chip

Description:
Use this command to get.
Command Syntax:
reset dsl dsp chip
Parameters:
Name
chipid chipid
Example:
$ get dsl dsp chip chipid 1
306
Description
This object is the Index of Dsl Chip for which reset is to be done.
Type: Reset -- Mandatory
Get -- Optional
Valid values: 1 - 9
IDL series User Guide