Table of Contents
Advertisement
Port Admin Status
Sticky Status
FDB Modify
Acl Global Deny Apply
Acl Global Track Apply
ProxyArpStatus
IP DSLAM
bridge port is disable (2), then OperStatus of the port should be disable
(2). If AdminStatus of the bridge port is changed to enable(1), then
OperStatus of the port should change to enable(1) if the bridge port is
ready to transmit and receive network traffic. The bridge port will have
the OperStatus value as dormant (5) if the 'configstatus' of the bridge
port is 'config' and it is waiting for a packet to be sensed, on its lower
interface index, to get activated.
The desired state of the bridge port. On creation the bridge port shall
be created in enabled AdminStatus by default.
Indicates if the port has been set as sticky. The value enable(1)
indicates that the entries learnt on this port won't be aged out. It also
indicates that the entries learnt on this port shall not be learnt on any
other port. The entries learnt on this port can only be removed by
management action or by making the value as disable (2) so that the
entries can be aged out. This field is unused if the bridge port is
created over an PPPOE/ IPOE interface or PPPOE/IPOE is sensed.
Any value of this field shall be ignored for a bridge port created over a
PPPOE/IPOE interface.
This specifies whether this port can overwrite an existing forwarding
database entry. This field is unused if the bridge port is created over an
PPPOE/ IPOE interface or PPPOE/IPOE is sensed. Any value of this
field shall be ignored for a bridge port created over a PPPOE/IPOE
interface.
This specifies whether the global acl macentry deny list represented by
MO AclGlobalMacList is to be applied to this port or not. The default
value of this parameter shall depend on the port type. For Net side
ports, the default value shall be disable and for the cpe side ports the
default value shall be enable. This field is unused if the bridge port is
created over an PPPOE/IPOE interface or PPPOE/IPOE is sensed.
Any value of this field shall be ignored for a bridge port created over a
PPPOE/IPOE interface.
This specifies whether the global acl macentry track list represented by
MO AclGlobalMacList is to be applied to this port or not. The default
value of this parameter shall depend on the port type. For Net side
ports, the default value shall be disable and for the cpe side ports the
default value shall be enable. This field is unused if the bridge port is
created over an PPPOE/IPOE interface or PPPOE/ IPOE is sensed.
Any value of this field shall be ignored for a bridge port created over a
PPPOE/IPOE interface.
The Proxy Arp Status on this bridge port. The value enable of this field
187
Advertisement
Table of Contents
