Table of Contents
Advertisement
Output field:
Field
IfName
LowIfName
EHDLC Sar Status
Admin Status
5.11 Ethemet Commands
5.11.1 Dot3 stats Commands
5.11.1.1 Get dot3 stats
Description:
Use this command to get.
Command Syntax:
get dot3 stats [ifname <interface-name>]
Parameters:
Name
ifname
<interface-name>
Example
$ get dot3 stats Ifname eth-0
Output
IfName
Alignment Errors
Single Collision Frames : 13
Deferred Tx Frames
Excess Collisions Frames : 17
IP DSLAM
Description
This parameter specifies the name assigned to this interface. Valid
Values starts from ehdlc-0 and continues to ehdlc-*
This specifies the lower interface index. This is the ifindex of the
DSL port on which EHDLC is being created. Valid Values start
from dsl-0 and continues to dsl-*
This defines the segmentation and reassembly status of the
hdlc/dsl interface. HDLC supports only 508 as frame size, to
support longer snmp messages, it should be turned off. By
default, the option taken is 'disable'.
Administrative status of the Ehdlc interface
Description
An index name that uniquely identifies an interface to
an ethernet-like medium.
Type: Get -- Optional
Valid values:eth-0 – eth01
: eth-0
: 11
FCS Errors
Multiple Collision Frames : 14
: 15
Late Collisions
Mac Tx Errors Frames
: 12
: 16
: 18
313
Advertisement
Table of Contents
