Table of Contents
Advertisement
FallBack
Caution:
Redundancy aggregator shall not be created, if aggregator interface is not
created or if LACP aggregator is created for the aggregator interface.
References:
create aggr intf command
get aggr intf command
5.4.8 Redundancy aggrport list Commands
5.4.8.1 Get aggrport list
Description:
Use this command to get.
Command Syntax:
get rdncy aggrport list [aggrifname <interface-name>]
Parameters:
Name
aggrifname
<interface-name>
Example:
$ get rdncy aggrport list aggrifname aggr-0
IP DSLAM
This specifies whether fallback is to happen for aggregator interface,
when a link goes down. As fallback trigger leads to re-propagation of
protocol PDUs to the links based on the state of the links, this may be
enabled if re-propagation of protocol PDUs is required for immediate
restore of peer protocol state on uplink devices. If such a treatment is
not required and Protocol time out may only be trigger for
re-propagation, Fallback trigger should be disabled.
Description
Index of the redundancy aggregator, for which layer2
interfaces are associated. Valid Value is aggr-0
Type: Get -- Optional
Valid values: aggr-0
151
Advertisement
Table of Contents
