Pia Stats Entry Commands; Get Pia Stats Entry; Reset Pia Stats Entry - Planet IP DSLAM IDL-2400 User Manual

VCI
VPI
L2 type
Encap Type
References:
PPPoE Intermediate Agent commands

5.20.7 Pia stats entry Commands

5.20.7.1 Get pia stats entry

Description:
Use this command to get.
Command Syntax:
get pia stats entry [portid <portid-val>] [vlan <vlan-val>]

5.20.7.2 Reset pia stats entry

Description:
Use this command to reset.
Command Syntax:
reset pia stats entry portid <portid-val> vlan <vlan-val>
Parameters:
Name
portid <portid-val>
IP DSLAM
considered only when the bitmask for portid is set in
ConfigSubOptionBitmask
VCI Identifier of the AAL5 VC corresponding the bridge
port for this instance is created
VPI Identifier of the AAL5 VC corresponding the bridge
port for this instance is created
This Parameter specifies the L2 type used
This Parameter specifies the encapsulation type of the
aal5 VC corresponding the bridge port for which this
instance is created
Description
Bridge port Identifier
Type: Reset -- Mandatory
Get -- Optional
Valid values: 1 - 194
531