Table of Contents
Advertisement
5.15.1.2 Reset interface stats
Description:
Use this command to reset the statistics of Ethernet, EoA, ATM, AAL5, DSL, DSLF,
DSLI, Aggr and EHDLC interfaces.
Command Syntax:
reset interface stats ifname<interface-name>
5.15.1.3 Get interface config
Description:
Use this command to view Interface Configuration.
Command Syntax:
get interface config ifname <interface-name>
5.15.1.4 Modify interface config
Description:
Use this command to modify interface configuration.
Command Syntax:
modify interface config ifname <interface-name> [trap enable|disable]
Parameters:
Name
Ifname
<interface-name>
trap enable|disable
Example:
$ get interface Config
IP DSLAM
Description
Interface name, for which configuration is to be modified or viewed.
Type: Get
-Optional Modify - Mandatory
Valid values: eth-*,atm-*,aal5-*, eoa-*, dsl-*, dslf-*, dsli-*, aggr-*,
ehdlc-*.
Indicates whether linkUp/linkDown traps should be generated for
this interface.
Type: Modify – Optional
Valid values : enable or disable
467
Advertisement
Table of Contents
