Table of Contents
Advertisement
Port Index
Query Received
Report Received
Filter Mode
Include SrcList
Exclude SrcList
Caution:
An entry in this table shall not be applicable for a bridge port created over the
PPPoE interface.
5.14.5 Igmpsnoop querier info Commands
5.14.5.1 Get igmpsnoop querier info
Description:
Use this command to get.
Command Syntax:
get igmpsnoop querier info [vlanid <vlanid-val >] [portid <portid-val>]
5.14.5.2 Create igmpsnoop querier info
Description:
Use this command to create.
Command Syntax:
create igmpsnoop querier info vlanid <vlanid-val > portid <portid-val >
IP DSLAM
accepted values is 00:30:4F:00:00:00 to 00:30:4F:7F:FF:FF.
This parameter specifies a bridge port belonging to the Vlan
(igmpVlanIndex) and Group (igmpsnoopMcastAddress), for which the
IgmpSnooping statistics are desired.
This parameter specifies thenumber of Igmp queries received on the
port belonging to a particular multicast group and Vlan.
This parameter specifies thenumber of Membership reports received on
the port belonging to a particular multicast group and Vlan.
This parameter specifies the current filter mode on a port for a given
group.
This parameter specifies the Include Source list, which is the list of
sources to be included in case of Include filter mode and the list of
conflicting sources in case of exclude mode of the port for a given group
This parameter specifies the Exclude Source list, which is the list of
sources to be excluded in case of exclude filter mode of the port for a
given group
461
Advertisement
Table of Contents
