5.9.5 ADSL ATUC Chanlntvl Commands
5.9.5.1 Get adsl atuc chanintvl
Description:
Use this command to get.
Command Syntax:
get adsl atuc chanintvl [ifname <interface-name>] [nintrvl <nintrvl-val>]
Parameters:
Name
ifname <fname-val>
nintrvl <nintrvl-val>
Example:
$ get adsl atuc chanintvl ifname dsli-0 nintrvl 1
Output:
Ifname
Rx Blocks
Corrected Blocks
Gs Time Elapsed(sec)
GsNoCellDelineation
GsOutOfCellDelineation : 0
AtucChanIntvlLcds
Output Fields:
FIELD
Ifname
IntervalNumber
Rx Blocks
Tx Blocks
Corrected Blocks
IP DSLAM
Description
The ADSL ATUC channel interface name.
Type: Get - Mandatory
Valid values: dsli-0 – dsli-23
Performance Data Interval number.
Type: Get - Mandatory
Valid values: 1 - 96
: dsli-0
IntervalNumber
: 10
Tx Blocks
: 20
Uncorrected Blocks : 1
: 30
Valid Data
: 20
GsHeaderErrorCheck : 0
AtucChanIntvlNcds : 20
: 20
Description
The ADSL ATUC channel interface name.
Performance Data Interval number.
Count of all encoded blocks received on this channel during this interval.
Count of all encoded blocks transmitted on this channel during this
interval.
Count of all encoded blocks received with errors that were corrected on
this channel during this interval.
: 1
: 45
: true
241