Table of Contents
Advertisement
Partner Sys Priority
Actor Sys ID
Partner Sys ID
Actor Oper Key
Partner Oper Key
Actor Admin Key
Collector Max Delay
Aggregation Type
Cautions:
LACP aggregator creation shall fail, if aggregator interface is not created.
LACP aggregator shall not be created, if Redundancy aggregator is created
for an aggregator interface.
References:
create aggr intf
get aggr intf
IP DSLAM
associated with the Actor's System ID.
A 2-octet read-only value that indicates the priority value
associated with the Partners SystemID.
A 6-octet read only MAC address value used as a unique
identifier for the System that contains this Aggregator.
A 6-octet read-only MAC address value consisting of the
unique identifier for the current protocol Partner of this
Aggregator.A value of zero indicates that there is no known
Partner.
The current operational value of the Key for the
Aggregator.
The current operational value of the Key for the Aggregator
is current protocol Partner.
The current administrative value of the Key for the
Aggregator
The value of this 16-bit read-write attribute defines the
maximum delay,in tens of microseconds,that may be
imposed by the Frame Collector between receiving a frame
from an Aggregator Parser,and either delivering the frame
to its MAC Client or discarding the frame.
Aggregation type. It can be either static or lacp
141
Advertisement
Table of Contents
