Table of Contents
Advertisement
Curr Output
Pwr(dBm/10)
DS Bin SNR Update
Bin SNR Margin(dB/10)
Oper Status
Admin Status
5.9.23 ADSL Line Profile Commands
5.9.23.1 Get adsl line profile
Description:
Use this command to get.
Command Syntax:
get adsl line profile [ifname <interface-name>]
5.9.23.2 Modify adsl line profile
Description:
Use this command to modify.
Command Syntax:
modify adsl line profile ifname <interface-name> [ atucrateadaptation fixed |
adaptAtStartup | adaptAtRuntime ] [ gsparamtestinputfile
<gsparamtestinputfile-val> ] [ atuctargetsnr <atuctargetsnr-val> ]
[ atucmaxsnrmargin <atucmaxsnrmargin-val> ] [ atucgsrsintcorrectionup
125us | 250us | 500us | 1ms | 2ms | 4ms | disable ] [ atucdnshiftsnrmargin
<atucdnshiftsnrmargin-val> ] [ atucupshiftsnrmargin <atucupshiftsnrmargin-val> ]
[ atucminupshifttime <atucminupshifttime-val> ] [ atucmindnshifttime
<atucmindnshifttime-val> ] [ atucfastmintxrate <atucfastmintxrate-val> ]
[ atucintlmintxrate <atucintlmintxrate-val> ] [ atucfastmaxtxrate
<atucfastmaxtxrate-val> ] [ atucintlmaxtxrate <atucintlmaxtxrate-val> ]
[ atucmaxintldelay <atucmaxintldelay-val> ] [ type noChannel | fastOnly |
interleavedOnly | fastOrInterleaved | fastAndInterleaved ] [ atucgstxendbin
<atucgstxendbin-val> ] [ atucgstxstartbin <atucgstxstartbin-val> ]
280
This conexant parameter indicates the measure of total output
power transmitted by this ATU. The value of this parameter is
dynamic and will also show the change in Tx power due to Power
Management. For example, the value will decrease in L2 low
power mode. This value can be negative.
Conexant parameter to enable or disable collection of
downstream SNR bin status
Bin SNR margin for particular sub carrier
The actual/current state of the interface. It can be either up or
down.
The desired state of the interface. It may be either Up or Down.
IDL series User Guide
Advertisement
Table of Contents
