Output Fields:
Field
ifname
lowif
ASMTxCount
ASMRxCount
TxLinkFailureReason
RxLinkFailureReason
5.4 Aggregation commands
5.4.1 Active Standby aggr info Commands
5.4.1.1 Get actstdby aggr info
Description:
Use this command to get.
Command Syntax:
get actstdby aggr info [ifname <interface-name>]
5.4.1.2 Modify actstdby aggr info
Description:
Use this command to create.
Command Syntax:
modify actstdby aggr info ifname <interface-name> [status Enable | Disable]
132
Description
This specifies the interface index used for the ATM Based Multi
pair Bonding type of interfaces. Valid Value is abond-X
This specifies the interface index used for the abond link (DSL)
interfaces. Valid Value is dsl-X, dsli-X, dslf-X
Per-link ASM Tx count. These are not exact counts and have
been kept for debugging.
Per-link ASM Rx count. These are not exact counts and have
been kept for debugging.
Failure reason for the abond link in Tx direction.
Failure reason for the abond link in Rx direction.
IDL series User Guide