Table of Contents
Advertisement
PM Conf PMSF
Line DELT Conf LDSF
Curr Output Pwr(dBm/10)
Enable
Bin Number
---------------------------------
[ 0] 16
Oper Status
Enable
Output Fields:
FIELD
IfName
Line Type
Coding Type
GsUtopia L2TxAddr
GsUtopia L2RxAddr
GsUtopia L2RxAddr2nd
GsUtopia
L2TxAddr2nd
Gs Clock Type
Gs Action
Trans Atuc Cap
Trans Atuc Actual
Trans Atuc Config
GsDmtTrellis
Trans Atur Cap
PM Conf PMSF
Line DELT Conf LDSF
IP DSLAM
: idleop
: inhibit
: 10
SNR Margin/bin
: Up
Description
The interface name of the DSL port.
Line type used by the DSL port.
Line coding type used by the port.
UTOPIA Level 2 Tx address for a line.
UTOPIA Level 2 Rx address.
Conexant parameter to set UTOPIA Level 2 Rx address for the
secondary bearer channel in case of Dual Latency. (length = 4
bytes)
Conexant parameter to set UTOPIA Level 2 Tx address for the
secondary bearer channel in case of Dual Latency. (length = 4
bytes)
Indicates use of crystal or oscillator.
Allows action on per-line basis.
Transmission modes that ATU-C is capable of.
Transmission modes
The transmission modes that the ATU-C is capable of supporting.
The modes available are limited by the design of the equipment.
REFERENCE"Section 7.3.2 ITU G.997.1" (length = 4 bytes).
Indicates whether trellis coding has been enabled or not.
The transmission modes that the ATU-R is capable of supporting.
The modes available are limited by the design of the equipment
(length = 4 bytes).
PM-related parameter used by ATU-C to force a change in the
line state. (Not available for ADSL/ADSL2Plus)
The DELT-related parameter used by ATU-C to force the line into
the loop diagnostics mode. (Not available for ADSL and
ADSL2plus)
DS Bin SNR Update
Admin Status
:
:
279
Advertisement
Table of Contents
