Send Join Empty
Recv Join In
Send Join In
Recv Empty
Send Empty
Recv Leave
Send Leave
Recv Leave All
Send Leave All
Leave Empty Rx
Leave Empty Tx
References:
gvrp commands
5.27.4 Vlan curr info Commands
5.27.4.1 Get vlan curr info
Description:
Use this command to get.
Command Syntax:
get vlan curr info [vlanid <vlanid-val >]
Parameters:
Name
vlanid <vlanid-val >
IP DSLAM
Counter for the number of Join Empty Messages
sent.
Counter for the number of Join In Messages
received.
Counter for the number of Join In Messages sent.
Counter for the number of Empty Messages
received.
Counter for the number of Empty Messages sent.
Counter for the number of Leave Messages
received.
Counter for the number of Leave Messages sent.
Counter for the number of Leave All Messages
received.
Counter for the number of Leave All Messages
sent.
Counter for the number of Leave Empty Rx
received.
Counter for the number of Leave Empty Tx sent.
Description
The VLAN Identifier.
Type: Get -- Optional
Valid values: 1 - 4095
655