5.9.15 Adsl atur intervalext Commands
5.9.15.1 Get adsl atur intervalext
Description:
This command is used to get.
Command Syntax:
get adsl atur intervalext [ifname <interface-name>] [nintrvl <nintrvl-val>]
Parameters:
Name
ifname
<interface-name>
nintrvl <nintrvl-val>
Example:
$ get adsl atur intervalext IFNAME dsl-0 NINTRVL 1
Output:
Ifname
IntervalNumber
IntervalSesl(sec) : 10
IntervalFecsL(sec) : 10
Output Fields:
FIELD
Ifname
IntervalNumber
IntervalSesl(sec)
IntervalUasL(sec)
IntervalFecsL(sec)
References
atur interval related commands
264
Description
The ADSL interface name.
Type : Get – Mandator
Valid values: dsl-0 – dsl-23
Count from 1 through 96, of 15 minute intervals.
Type: Get -- Mandatory
Valid values: 1 - 96
: dsl-0
: 1
IntervalUasL(sec) : 10
Description
The ADSL interface name.
Count from 1 through 96, of 15 minute intervals.
Count of seconds in the interval when there was severely errored seconds.
Count of seconds in the interval when there was unavailable errored seconds.
Count of seconds in the interval when there was Forward error correction seconds.
IDL series User Guide