Bridge Static Multicast Commands; Create Bridge Static Mcast; Delete Bridge Static Mcast; Get Bridge Static Mcast - Planet IP DSLAM IDL-2400 User Manual

Forward Unregistered
Forbidden Ports
Cautions:
An entry in this table shall not be applicable for a bridge port created over
PPPOE/IPOE interface.
References:
Bridge commands.

5.7.4 Bridge Static Multicast Commands

5.7.4.1 Create bridge static mcast

Description:
Use this command is used to create.
Command Syntax:
create bridge static mcast [vlanid <vlanid-val>] mcastaddr <mcastaddr-val>
[egressports <egressports-val>] [forbidegressports <forbidegressports-val>]

5.7.4.2 Delete bridge static mcast

Description:
Use this command is used to delete.
Command Syntax:
delete bridge static mcast [vlanid <vlanid-val>] mcastaddr <mcastaddr-val>

5.7.4.3 Get bridge static mcast

Description:
Use this command is used to get.
Command Syntax:
get bridge static mcast [vlanid <vlanid-val>] [mcastaddr <mcastaddr-val>]
216
be given, separated by spaces.
The set of ports, configured by management in this VLAN, for which
the Service Requirement attribute Forward Unregistered Multicast
Groups, may not be dynamically registered by GMRP. More than one
value can be given, separated by spaces.
IDL series User Guide