Planet IP DSLAM IDL-2400 User Manual page 287

Ip dslam
Table of Contents

Advertisement

aturtargetsnrmargin
<aturtargetsnrmargin-val>
aturdnshiftsnrmargin
<aturdnshiftsnrmargin-val>
aturupshiftsnrmargin
<aturupshiftsnrmargin-val>
aturminupshifttime
<aturminupshifttime-val>
aturmindnshifttime
<aturmindnshifttime-val>
aturfastmintxrate
<aturfastmintxrate-val>
aturintlmintxrate
<aturintlmintxrate-val>
aturfastmaxtxrate
<aturfastmaxtxrate-val>
IP DSLAM
Noise Margin the modem must achieve with a BER of 10 to the power
7 or better to successfully complete initialization
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
Configured Signal/ Noise Margin for rate downshift. If the noise margin
falls below this level, the modem should attempt to decrease its
transmit rate. In the case that RADSL mode is not present, the value
will be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
Configured Signal/ Noise Margin for rate upshift. If the noise margin
rises above this level, the modem should attempt to increase itís
transmit rate. In the case that RADSL is not present, the value will be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
Minimum time that the current margin is above UpshiftSnrMgn, before
an upshift occurs. In the case that RADSL is not present, the value will
be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
Minimum time that the current margin is below DownshiftSnrMgn,
before a downshift occurs. In the case that RADSL mode is not present,
the value will be 0.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
Configured Minimum Transmit rate for 'Fast' channels, in bps. Also
refer to 'adslAturConfRateChanRatio' for information regarding RADSL
mode and ATU-C transmit rate for ATU-R receive rates.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
Configured Minimum Transmit rate for 'Interleave' channels, in bps.
Also refer to 'adslAturConfRateChanRatio' for information regarding
RADSL mode and to ATU-C transmit rate for ATUR receive rates.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
Configured Maximum Transmit rate for 'Fast' channels, in bps. Also
refer to 'adslAturConfRateChanRatio' for information regarding RADSL
mode and to ATU-C transmit rate for ATUR receive rates.
Type: Modify -- Optional
Valid values: 0 - 0xffffffff
287

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idl-2401Idl-4800Idl-4801

Table of Contents