Table of Contents
Advertisement
Output:
Verbose Mode On
Entry Created
Rule Id
Set Priority
Stats admin status
Rule Direction
Pkt Type
Application Description : lacp
Snoop Level
Expression Id
Action Value
Action Mask
Verbose Mode Off:
Entry Created
Output field:
Field
Rule Id
Rule Action
Set Priority
IP DSLAM
: 1
Rule Action
: 7
Admin status : enable
: disable
Rule Priority : high
: in
ApplyWhenReq : disable
: Ucast
: interface
: exprid 1
: 0x00000000
: 0xffffffff
Description
Unique identifier of a filter rule.
Action to be applied for the packets matching this filter rule. This
field can be modified only if 'ruleStatus' has the value 'disable'.
'exprdef (10)' action has a special significance that action is
defined in the expression. In this case the 'ExprId' field must be
specified. For other types of actions, the default relationship
between subrules is all ANDed. If 'ruleDir' value is 'out', 'clfrdef'
and 'ratelimiter' action types are invalid. If the action is 'clfrdef',
then the rule can have at most one subrule, that too of type
'clfrtree'. The actions setprio, retagprio and setserviceprio require
priority value to be specified in ruleSetPrio parameter. The actions
sendtocontrol, copytocontrol, modifytos, setbaclevel, setvlanid,
retagvlanid, setservicevlanid, retagservicevlanid, ratelimiter and
mirror require an additional value to be specified in ruleActionVal
parameter. The actions sendtocontrol, copytocontrol and
modifytos also require ruleActionMask parameter to be specified.
Priority to be set for packets matching this rule. This field is valid
only if RuleAction is 'setprio' or 'retagprio'. If the RuleAction is
'setprio' then this value is internal priroity and is used along with
egress port traffic class mapping table, to determine the output
: setprio
387
Advertisement
Table of Contents
