5.25.5.3 Get rmon idletime
Description:
Use this command to display a list of idle time records.
Command Syntax:
get rmon idletime [numentries <numentries-val>]
Parameters:
Name
Numentries
<numentries-val>
Mode:
Super-User, User
Example:
$ get rmon idletime numentries 1
Output:
$get rmon idletime numentries 1
Start Time
Idle
Util %
Time
---------------------------------------------------------------------------
Thu Jan 1 12:34:51 1970 Thu Jan 1 12:35:00 1970 10s 7s
Output Fields:
FIELD
Start Time
End Time
Total Time
Idle Time
IP DSLAM
Description:
This specifies last numentries idle time records
to be displayed
Type: Optional
Valid values : 1 to 6
Default : 10
End Time
Description
This specifies the starting time of the period for
which the idle time was recorded
This specifies the end time of the period for
which the idle time was recorded
This specifies the total time (in seconds) elapsed
in this period.
This specifies the time (in seconds) for which the
Total
Time
30
613