Output field:
Field
Profile Identifier
Class Id
Traffic Class Param Size
Traffic Class Param Thresh
References:
See traffic class profile related commands.
5.21.11 Trfclass profile info Commands
5.21.11.1 Get trfclass profile info
Description:
Use this command to get.
Command Syntax:
get trfclass profile info [profileid <profileid-val>]
5.21.11.2 Create trfclass profile info
Description:
Use this command to get.
Command Syntax:
create trfclass profile info profileid <profileid-val> iftype eth | atm
5.21.11.3 Delete trfclass profile info
Description:
Use this command to delete.
Command Syntax:
get trfclass profile info profileid <profileid-val>
IP DSLAM
Description
Traffic class profile identifier.
Traffic class profile class identifier.
This parameter specifies the size of the Traffic class.
This parameter specifies the low threshold of the queue, as a
percentage of the queue size. When the queue is full beyond
this threshold, only conforming frames are passed and
non-conforming frames are dropped. Conformance of frames is
determined as per IRL configured on input the ATM port.
559