Table of Contents
Advertisement
Total 128-255 Octets
Total 256-511 Octets
Total 512-1023 Octets
Total 1024-1518 Octets
Caution:
This command is not supported on an EoA interface for which ConfigStatus is
set to Config.
5.22.2 RMON Task Info Commands
5.22.2.1 Get rmon task
Description:
Use this command to get.
Command Syntax:
get rmon task [rname <task-name>]
Parameters:
Name
Rname< taskname>
564
bits but including FCS octets).
The total number of packets (including bad
packets) received that were between 128 and
255 octets in length inclusive (excluding framing
bits but including FCS octets).
The total number of packets (including bad
packets) received that were between 256 and
511 octets in length inclusive (excluding framing
bits but including FCS octets).
The total number of packets (including bad
packets) received that were between 512 and
1023 octets in length inclusive (excluding framing
bits but including FCS octets).
The total number of packets (including bad
packets) received that were between 1024 and
1518 octets in length inclusive (excluding framing
bits but including FCS octets).
Description
This parameter specifies the name of a particular
task.
Valid values: Any task name present in the
system.
IDL series User Guide
Advertisement
Table of Contents
