Bridge Port Map Commands; Get Bridge Port Map; Create Bridge Port Map; Delete Bridge Port Map - Planet IP DSLAM IDL-2400 User Manual

5.6.5 Bridge Port Map Commands

5.6.5.1 Get bridge port map

Description:
Use this command to get.
Command Syntax:
get bridge port map [portid <portid-val>] [ifname <interface-name>]

5.6.5.2 Create bridge port map

Description:
Use this command to create.
Command Syntax:
create bridge port map portid <portid-val> ifname <interface-name>

5.6.5.3 Delete bridge port map

Description:
Use this command to delete.
Command Syntax:
delete bridge port map portid <portid-val> ifname <interface-name>
IP DSLAM
corresponding instance of dot1qTpFdbAddress is also the
value of an existing instance of dot1qStaticAddress. The value
internal (6) indicates that the entry is a internal entry and
cannot be deleted by the user. This entry gets created for the
IPOE/PPPOE interfaces when the bridge port over those
IPOE/PPOE interfaces gets admin enabled. The mac address
in this entry shall be the one specified in the mac address
profile and VlanId shall be the PortVlanId of the Bridge Port.
The value other (1) indicates that this is associated with a sticky
port.
179