Table of Contents
Advertisement
5.7.3 Bridge mcast fwdunreg Commands
5.7.3.1 Get bridge mcast fwdunreg
Description:
Use this command to get.
Command Syntax:
get bridge mcast fwdunreg [vlanid <vlanid-val>]
5.7.3.2 Modify bridge mcast fwdunreg
Description Syntax:
Use this command to modify.
Command Syntax:
modify bridge mcast fwdunreg [vlanid <vlanid-val>] [egressports
<egressports-val> | none] [forbidegressports <forbidegressports-val> | none]
Parameters:
Name
vlanid <vlanid-val>
egressports
<egressports-val> | none
214
Description
The VLAN id for this VLAN. In devices supporting "Shared Vlan
for multicast" capability, the information for a multicast MAC
address is shared across VLANS. Hence, vlanid is not required
and is passed as zero. In devices supporting "Independent Vlan
for multicast" capability. Each vlan can have its own information
for a multicast MAC address. Hence, VLAN id is a mandatory
parameter and a valid value of vlanid must be passed. For No
Vlan case VLAN id is not required. When Vlan transparency
feature is supported, the valid range for vlanid also includes
4097. In case of "Shared Vlan Multicast also there shall always
be a seperate entry for 4097 if the VLAN with that VLAN Id is
created. VLAN here means the 802.1q Vlan in case of Native
Vlan mode and Virtual Vlan in case of Stacked Vlan Mode.
Type: Modify － Optional
Get － Optional
Valid values: 0 - 4095
The set of ports, configured by management, in this VLAN, to
which multicast group-addressed frames for which there is no
more specific forwarding information, are to be forwarded. More
than one value can be given, separated by spaces.
IDL series User Guide
Advertisement
Table of Contents
