Interface Commands; Get Interface Stats - Planet IP DSLAM IDL-2400 User Manual

5.15 Interface Commands

5.15.1 Interface Commands

5.15.1.1 Get interface stats

Description:
Use this command to view statistics for one interface or all the interfaces.
Command Syntax:
get interface stats [ifname <interface-name>]
Parameters:
Name
Ifname
<interface-name>
Example:
$ get interface stats ifname eth-0
Output:
Verbose Mode On
Entry Created
Interface
Type
Bandwidth
00:BB:CC:DD:EE:F1
Last Change(sec)
Admin Status
In Octets
In Discards
In Errors
In Ucast Pkts
464
Description
Index of the interface having one to one mapping with
IfTable. Only Ethernet, EOA, Aggregator, HDLC,
PPPOE, IPOE, ABOND, ATM, ATM VC Aggregation
and ATM VC interface index are supported for reset
operation.
Type : Optional
Valid values: aal5-*, eth-0, eth-1,atm-*, eoa-*, dsl-*,
dslf-*, dsli-*, aggr-*, ehdlc-*, pppoe-*, pppr-*, vdsl-*,
ipoe-*, abond-* , vcaggr-*
: eth-0 Description
: ETHERNET
: 100000000
: 219 Unknown Prot Pkts : 0
: Up Operational Status : Up
: 396312 Out Octets
: 0 Out Discards
: 0 Out Errors
: 2291 Out Ucast Pkts
: eth-0
Mtu
Phy Adddr
: 168929
: 0
: 0
: 2518
: 1500
:
IDL series User Guide