Bridge Port Priomap Commands; Get Bridge Port Priomap; Modify Bridge Port Priomap - Planet IP DSLAM IDL-2400 User Manual

5.2.4 Bridge port priomap Commands

5.2.4.1 Get bridge port priomap

Description:
Use this command to get.
Command Syntax:
get bridge port priomap [portid <portid-val >] [usrprio <usrprio-val >]

5.2.4.2 Modify bridge port priomap

Description:
Use this command to modify.
Command Syntax:
modify bridge port priomap portid <portid-val > usrprio <usrprio-val>
[regenprio <regenprio-val >]
Parameters:
Name
portid <portid-val >
usrprio <usrprio-val >
regenprio
<regenprio-val >
Example:
$ get bridge port priomap portid 1 usrPrio 1
IP DSLAM
Description
Port number of the port for which this entry contains bridge
management information.
Type: Modify -- Mandatory
Get --Optional
Valid values: 1-386
The User Priority for a frame received on this port. Since it
can arrive in a tag header, it can have range 0-7.
Type: Modify -- Mandatory
Get --Optional
Valid values: 0 - 7
The priority to which the incoming User priority is mapped
for this port.
Type: Modify --Optional
alid values: 0 - 7
119