Table of Contents
Advertisement
Src Ip Addr Cmp
Dest Ip Addr Cmp
Ip Src Addr Mask
Ip Dest Addr Mask
Subrule Prio
5.13.27 Filter subrule clfrtree Commands
5.13.27.1 Get Filter subrule clfrtree
Description:
Use this command to get.
Command Syntax:
get filter subrule clfrtree [ruleid <ruleid-val>] [subruleid <subruleid-val >]
5.13.27.2 Create filter subrule clfrtree
Description:
Use this command to create.
Command Syntax:
create filter subrule clfrtree ruleid <ruleid-val > subruleid <subruleid-val >
tname <tname-val > entrypid <entrypid-val >
404
Source IP address comparison type.'Ingenlist' means check if
source IP address present in interface classifier generic
list.'Notingenlist' means check if source IP address not present in
interface classifier generic list. 'Ingenlist' and 'Notingenlist' are
invalid if the direction of the rule for which this subrule is being
created is 'out'.
Destination IP address comparison type.'Ingenlist' means check if
destination IP address present in interface classifier generic
list.'Notingenlist' means check if destination IP address not
present in interface classifier generic list.'Ingenlist' and
'Notingenlist' are invalid if the direction of the rule for which this
subrule is being created is 'out'.
The mask value for source IP address. The mask is applied over
the source IP address before checking against a value.
The mask value for destination IP address. The mask is applied
over the destination IP address before checking against a value.
This specifies the priority of the subrule. Based on this priority
value, the subrule is created in fast or slow memory. In case
priority is specified as 'asinrule', subrule priority will be same as
specified in the rule.
IDL series User Guide
Advertisement
Table of Contents
