Table of Contents
Advertisement
Parameters:
Name
ifname
<interface-name>
lowif<lowif-val>
sarstatus Enable |
Disable
enable | disable
Example:
$ create ehdlc intf ifname ehdlc-0 lowif dsl-0 SarStatus Enable enable
Output:
Verbose Mode On
Entry Created
IfName
EHDLC Sar Status : enable
Verbose Mode Off:
Entry Created
312
Description
This parameter specifies the name assigned to this interface.
Valid Values starts from ehdlc-0 and continues to ehdlc-*
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: IAD_MIN_EHDLC_IFINDEX -
IAD_MAX_EHDLC_IFINDEX
This specifies the lower interface index. This is the ifindex of
the DSL port on which EHDLC is being created. Valid Values
start from dsl-0 and continues to dsl-*
Type: Create -- Mandatory
Valid values: dsl-0 – dsl-23
This defines the segmentation and reassembly status of the
hdlc/dsl interface. HDLC supports only 508 as frame size, to
support longer snmp messages, it should be turn off. By
default, the option taken is 'disable'.
Type: Create -- Optional
Modify -- Optional
Default value: disable
Administrative status of the Ehdlc interface
Type: Optional
: ehdlc-0
LowIfName
Admin Status : Enable
: dsl-0
IDL series User Guide
Advertisement
Table of Contents
