Adsl Atuc Channel Commands; Get Adsl Atuc Channel - Planet IP DSLAM IDL-2400 User Manual

5.9.3 ADSL ATUC Channel Commands

5.9.3.1 Get adsl atuc channel

Description:
Use this command to get.
Command Syntax:
get adsl atuc channel [ifname <interface-name>]
Parameters:
Name
ifname <fname-val>
Example:
$ get adsl atuc channel ifname dsli-0
Output:
Ifname
Interleave Delay(ms) : 20
Prev Tx Rate(bps)
Gs Curr Atm Status
GsRsDepth
AtucChanPerfAtmCD
AtucChanGsINPdn
AtucChanGsM0dn
AtucChanGsB0dn
Output Fields:
FIELD
Ifname
Interleave Delay(ms)
Curr Tx Rate(bps)
Prev Tx Rate(bps)
Crc Block Length(byte)
Gs Curr Atm Status
236
Description
The ADSL ATUC channel interface name.
Type: Get – Optional
Valid values: dsli-0 - dsli-23
: dsli-0
Curr Tx Rate(bps)
: 40 Crc Block Length(byte) : 90
: NoAtmDefect GsSymbolsPerRsWord
: 20 GsRedundantBytesPerRsCode: 100
: 10 AtucChanPerfAtmCU
: 10 AtucChanGsL0dn
: 10 AtucChanGsT0dn
: 10
Description
The ADSL ATUC channel interface name.
Interleave delay for this channel.
Actual transmit rate on this channel.
The rate at the time of the last adslAtucRateChangeTrap
event.
Indicates the length of the channel data-block, on which
the CRC operates.
Indicates the current ATM Status.
: 80
: 10
: 10
: 10
: 10
IDL series User Guide