Atm Port Commands; Get Atm Port; Create Atm Port - Planet IP DSLAM IDL-2400 User Manual

Output Fields:
Field
IfName
VPI
VCI
LB Type
OAM Location Id
OAM LB Result
References:
atm vc related commands.
atm port and statistics related commands.

5.5.4 ATM Port Commands

5.5.4.1 Get atm port

Description:
Use this command to get.
Command Syntax:
get atm port [ifname <interface-name>]

5.5.4.2 Create atm port

Description:
Use this command to create.
Command Syntax:
create atm port ifname <interface-name> lowif <lowif-val> [ maxvc <maxvc-val> ]
[ maxvpibits <maxvpibits-val> ] [ maxvcibits <maxvcibits-val> ] [ oamsrc
<oamsrc-val> ] [ orl <orl-val> ] [ trfclassprofileid <trfclassprofileid-val> ]
[ profilename <profilename-val> ] [ ctlpktinstid <ctlpktinstid-val> ]
[ atmtransporttype cell | packet ] [ mirrormode data | mirror ] [ enable |
disable ]
158
Description
Interface Index of the ATM port, on which this VC is getting configured.
This is the Virtual Circuit Identifier.
This is the Virtual Port Identifier.
This specifies the loop back type used. It may be:e2e or segment.
This defines the loopback site, which will loopback the cell.
This specifies the result of the loop back test. It may be Result
Unavailable, Seg Succeeded, Seg Failed, E2e Succeeded, E2e Failed,
Test Aborted, or Test In Progress.
IDL series User Guide