Cbuftrace Cfg Commands; Get Cbuftrace Cfg; Reset Cbuftrace Cfg; System Commands - Planet IP DSLAM IDL-2400 User Manual

5.25 System Commands

5.25.1 Cbuftrace cfg Commands

5.25.1.1 Get cbuftrace cfg

Description:
Use this command to get.
Command Syntax:
get cbuftrace cfg [module <module-val>]

5.25.1.2 Reset cbuftrace cfg

Description:
Use this command to reset.
Command Syntax:
reset cbuftrace cfg module <module-val>
Parameters:
Name
module <module-val>
Example:
$ get cbuftrace cfg module GAG
Output:
module : GAG
flow : 3
Output field:
Field Description
module This specifies the module, for which c-buftrace configuration is to be modified
flow
level
594
This specifies the module, for which c-buftrace configuration is to be modified
Type: Reset -- Mandatory
Get -- Optional
level : 0xff
This indicates a Hexadecimal bitmask, which sets the filter for c-buftrace flow.
This indicates a Hexadecimal bitmask, which sets the filter for c-buftrace level.
Description
IDL series User Guide