Table of Contents
Advertisement
5.4.6 LACP AGGRPort Stats Commands
5.4.6.1 Get lacp aggrport stats
Description:
Use this command to get LACP aggregator port statistics.
Command Syntax:
get lacp aggrport stats [ifname <interface-name>]
5.4.6.2 Reset lacp aggrport stats
Description:
Use this command to reset LACP aggregator port statistics.
Command Syntax:
reset lacp aggrport stats ifname <interface-name>
Note:
This command is not supported in this release.
Parameters:
Name
Ifname
<interface-name>
Example :
$ get lacp aggrport stats ifname eth-0
Output:
Interface
LACPDUs Rx
MarkerPDUs Rx
Marker Response PDUs Rx : 1
Unknown Rx
IP DSLAM
Description
The IfName of the Ethernet interface for the
aggregator.
Type : Modify － Mandatory
Get － Optional
Valid values : eth-*, eoa-*
: eth-0
: 1
LACPDUs Tx
: 1
MarkerPDUs Tx
Marker Response PDUs Tx : 1
: 1
Illegal Rx
: 1
: 1
: 1
147
Advertisement
Table of Contents
