Table of Contents
Advertisement
5.9.16 ADSL ATUR Perf Commands
5.9.16.1 Get adsl atur perf
Description:
This command is used to get.
Command Syntax:
get adsl atur perf [ifname <interface-name>]
Parameters:
Name
ifname
<interface-name>
Example:
$ get adsl atur perf ifname dsl-0
Output:
Ifname
Perf Valid Intervals
Perf Invalid Intervals
Time Elapsed/Monitored(sec) -
LOFS (sec)
LOSS (sec)
LPRS (sec)
ES (sec)
Output Fields:
FIELD
Ifname
Perf Valid Intervals
Perf Invalid Intervals
Time
IP DSLAM
Description
The ADSL interface name.
Type : Get – Mandatory
Valid values: dsl-0 – dsl-23.
: dsl-0
: 10
: 10
PerfData
10
10
10
10
10
Description
Ifindex of the type Adsl port
The number of previous 15-minute intervals in the interval table for
which data was collected.
The number of intervals in the range from 0 to the value of
'adslAturPerfValid-Intervals' for which no data is available. This object
will typically be zero except in cases where the data for some intervals
are not available (e.g., in proxy situations).
Total elapsed seconds in the intervals – Curr15Min,
Curr15Min Curr1Day
10
10
10
10
10
10
10
10
10
Prev1Day
10
10
10
10
10
265
Advertisement
Table of Contents
