Create Filter Rule Map; Delete Filter Rule Map; Modify Filter Rule Map - Planet IP DSLAM IDL-2400 User Manual

5.13.22.2 Create filter rule map

Description:
Use this command to create.
Command Syntax:
create filter rule map ifname <interface-name>| all | alleoa | alleth | allpppoe |
allcpe | allipoe stageid <stageid-val> ruleid <ruleid-val> [orderid <orderid-val>]

5.13.22.3 Delete filter rule map

Description:
Use this command to delete.
Command Syntax:
delete filter rule map ifname <interface-name>| all | alleoa | alleth | allpppoe |
allcpe | allipoe stageid <stageid-val> ruleid <ruleid-val>

5.13.22.4 Modify filter rule map

Description:
Use this command to modify.
Command Syntax:
modify filter rule map ifname <interface-name>| all | alleoa | alleth | allpppoe |
allcpe | allipoe stageid <stageid-val> ruleid <ruleid-val> [orderid <orderid-val>]
Parameters:
Name
Ifname
<interface-name>| all
|alleoa | alleth |
allpppoe| allcpe |
allipoe
390
Description
Name of the interface whose mapping is being created. Only EOA,
PPPoE, IPOE and ethernet interfaces are allowed. If the value of
this field is 'All', it indicates all interfaces, 'AllEoa' indicates all 'eoa'
interfaces, and 'AllEth' indicates all 'ethernet'interfaces. AllPppoe'
indicates all 'PPPoE'interfaces, 'AllIpoe' indicates all 'IPOE'
interfaces and 'AllCpe' indicates all eoa , all ipoe and pppoe
interfaces. If a bridge port on aggregated interface is created then
this field can not have ifIndex of any specific ethernet interface.
Type: Create － Mandatory
Delete － Mandatory
Modify － Mandatory
Get － Optional
Valid values: , all , alleoa, alleth, allpppoe, allcpe,| allipoe
IDL series User Guide