Planet IP DSLAM IDL-2400 User Manual page 285

<atucgsrxendbin-val>
atucgsrxbinadjust disable
atucgsltriggermode locCrc |
rmtCrc | snrInc | snrDec |
disable
atucgsadi2x standard
atucgsinitiate waitPn | ctone
| initiatePn
atucgstxpoweratten 0 |
point1 | point2 | point3 | point4
| point5 | point6 | point7 |
point8 | point9 | 1 | 2 | 3 | 4 | 5 |
6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
14 | 15 | 16 | 17 | 18 | 19 | 20 |
21 | 22 | 23 | 24 | 25 | 26 | 27 |
28 | 29 | 30 | 31 | 32 | 33 | 34 |
35 | 36 | 37 | 38 | 39 | 40
atucgscodinggain Auto | 0 |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 256
atucgsrsfastovrhddn 50 | 25
| 12 | 6 | 3 | 1 | Disable
atucgsrsintcorrectiondn
125Us | 250Us | 500Us | 1Ms |
2Ms | 4Ms | Disable
atucgsrsfastovrhdup 50 | 25
| 12 | 6 | 3 | 1 | Disable
atucgsdrstby Disable |
Enable
atucgsexpexch Expanded |
Short
atucgsescfastretrain Enable
| Disable
atucgsfastretrain Enable |
Disable
IP DSLAM
Type: Modify -- Optional
Valid values: 0x06 - 0x1ff
This parameter employs Rx Start/End bin settings
Type: Modify -- Optional
The type of event that triggers a fast retrain
Type: Modify -- Optional
For non-standard compliant ADI CPE
Type: Modify -- Optional
Specifies which end initiates startup. It is also used to send a C-tone to
the remote unit.
Type: Modify -- Optional
The value in dB of Tx power attenuation
Type: Modify -- Optional
Sets the coding gain in dB increments
Type: Modify -- Optional
This parameter sets the percentage overhead for the downstream fast
buffer. RS can also be disabled.
Type: Modify -- Optional
This parameter sets the correction time for the downstream interleaved
buffer.RS can also be disabled.
Type: Modify -- Optional
This parameter sets the percentage overhead for the upstream fast
buffer.RS can also be disabled.
Type: Modify -- Optional
This parameter provides the ability to disable power to the line driver
Type: Modify -- Optional
T1.413 parameter that Enables/Disables EES
Type: Modify -- Optional
This parameter enables/disables escape to the fast retrain capability
Type: Modify -- Optional
This parameter enables/disables the fast retrain capability. Currently
supported only in G.lite mode.
285