Table of Contents
Advertisement
Elapsed/Monitored(sec)
LOFS (sec)
LOSS (sec)
LPRS (sec)
ES (sec)
5.9.17 Adsl atur perfext Commands
5.9.17.1 Get adsl atur perfext
Description:
Use this command to get.
Command Syntax:
get adsl atur perfext [ifname <interface-name>]
Parameters:
Name
ifname <interface-name>
Example:
$ get adsl atur perfext ifname dsl-0
266
Curr1Day and Monitored seconds in Prev1Day.
Performance Data : Count of number of Loss of
Framing failures since agent was reset.
Curr15Min/Curr1Day/Prev1Day : Count of seconds
in the current 15-minute/ current 1-day/ previous 1-day interval, when
there was Loss of Framing.
Performance Data : Count of number of Loss of
signal failures since agent was reset.
Curr15Min/Curr1Day/Prev1Day : Count of seconds
in the current 15-minute/ current 1-day/ previous 1-day interval, when
there was Loss of signals.
Performance Data: Count of number of Loss of power failures, since
agent was reset.
Curr15Min/Curr1Day/Prev1Day : Count of seconds
in the current 15-minute/ current 1-day/ previous 1- day interval, when
there was Loss of power.
Performance Data : Count of number of errored seconds since agent
was reset.
Curr15Min/Curr1Day/Prev1Day : Count of errored seconds in the
current 15-minute/ current 1-day/ previous 1-day interval.
Description
Ifindex of the type Adsl port
Type: Get -- Mandatory
Valid values: dsl-0 – dsl-23
IDL series User Guide
Advertisement
Table of Contents
