Atm Commands; Aal5 Vc Statistics Commands; Get Atm Aal5 Stats - Planet IP DSLAM IDL-2400 User Manual

5.5 ATM commands

5.5.1 AAL5 VC Statistics Commands

5.5.1.1 Get atm aal5 stats

Description:
Use this command to get AAL5 VC statistics.
Command Syntax:
get atm aal5 stats [ifname <interface-name>]
Parameters:
Name
Ifname
<interface-name>
Example:
$ get atm aal5 stats ifname aal5-0
Output:
Low IfName
VPI
Tx Frames count : 100
Tx Bytes count
CRC Errors count : 0
Output Fields:
Field
VC IfName
Low IfName
VPI
VCI
Tx Frames count
Rx Frames count
Tx Bytes count
Rx Bytes count
154
Description
This parameter specifies the interface for which
information is desired
Type : Get - Optional
Valid values : aal5-0 -
: atm-0
: 0 VCI
: 1535
Description
The name of the aal5 (aal5-0 etc) interface, for which statistics needs to be
retrieved.
This specifies the ATM port name. It can be : atm-0
This is the Virtual Port Identifier.
This is the Virtual Circuit Identifier.
The number of AAL5 CPCS PDUs transmitted on this AAL5 VCC.
The number of AAL5 CPCS PDUs received on this AAL5 VCC.
The number of octets contained in AAL5 CPCS PDUs received on this AAL5 VCC.
The number of octets contained in AAL5 CPCS PDUs received on this AAL5 VCC.
VC IfName : aal5-0
: 1
Rx Frames count : 85
Rx Bytes count : 1200
Oversized SDU : 0
IDL series User Guide