Table of Contents
Advertisement
5.26.2.2 Create atm vcaggr map
Description:
Use this command to create.
Command Syntax:
create atm vcaggr map mapid <mapid-val> vc <vc-val> [dnstrmpriolist
{0|1|2|3|4|5|6|7} +|none] [upstrmdefprio <upstrmdefprio-val> |none]
[upstrmregenprio <upstrmregenprio-val> |none]
5.26.2.3 Delete atm vcaggr map
Description:
Use this command to delete.
Command Syntax:
delete atm vcaggr map mapid <mapid-val>vc <vc-val>
5.26.2.4 Modify atm vcaggr map
Description:
Use this command to modify.
Command Syntax:
modify atm vcaggr map mapid <mapid-val> vc <vc-val> [dnstrmpriolist
{0|1|2|3|4|5|6|7} +|none] [upstrmdefprio <upstrmdefprio-val> |none]
[upstrmregenprio <upstrmregenprio-val> |none]
Parameters:
Name
mapid <mapid-val>
IP DSLAM
Description
It contains the Id of VcAggregation Map. The
VcAggrMap contains the list of VCs being
aggregated and the associated priorities in
downstream and upstream directions. Once the
VC aggregation interface is created with the a
MapId, no more entries can be created in the
VcAggrMap table for that MapId
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 24
645
Advertisement
Table of Contents
