Table of Contents
Advertisement
Parameters:
Name
numentries
<numentries-val>
Example:
$ get system reboot info numentries 1
Output :
Verbose Mode On
CP Bin Version
DP Bin Version
Time of Reboot
Reboot Failure Cause : DP Init Failure
Reboot Type
Output Fields:
FIELD
Control Plane Version
Data Plane Version
Time of Reboot
Type of Reboot
Failure Cause
IP DSLAM
Description:
This specifies the last <numentries> number of
reboot failures recorded in the system.
Type: Optional
Valid values : 1 to 100
Default : 1
: 1.6
: 1.8
: Thu Jan 2 12:34:56 1970
: Secondary CFG
Description
The control Plane Version with which the system
could not come up.
The data Plane Version with which the system
could not come up.
Time at which the reboot failure occured.
This tells the type of reboot with which the
system is trying to come up. The various possible
values are :-
Last, Back Up, Default, Minimum, Clean.
This tells the various causes of failure that
system encountered while rebooting. It can be :-
Sdram CP Decompress failed
Nvram CP Decompress failed
Sdram DP Decompress failed
Nvram DP Decompress failed
DP Init Failure
Nvm CP Nvm DP CI Mismatch
Nvm CP Sdram DP CI Mismatch
Sdram CP Nvm DP CI Mismatch ＃
617
Advertisement
Table of Contents
