Table of Contents
Advertisement
5.21.7.4 Modify rl profile info
Description:
Use this command to modify
Command Syntax:
modify rl profile info profileid <profileid-val> [ rate <rate-val> ] [ mbs <mbs-val> ]
[ level packet | byte ] [ type sr2cm | trtcm ] [ peakrate <peakrate-val> ] [ pbs
<pbs-val> ]
Parameters:
Name
profileid
<profileid-val>
rate <rate-val>
mbs <mbs-val>
IP DSLAM
Description
Rate limiter's configuration profile identifier,
whichuniquely identifies the configuration profile. The
configuration profile contains all parameters required
for rate limiting algorithm to operate.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 16
This field defines the committed information rate. If
'level' is 'packet'(1), the unit is packets per second. If
'level' is 'byte'(2), the unit is bits per second.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 - 100000000
Default value: 100000000
This field defines the committed burst size. If 'level' is
'packet'(1), the unit is number of packets. If 'level' is
'byte'(2), the unit is number of bytes.
Type: Create -- Optional
Modify -- Optional
Valid values: 4 - 65535
Default value: 65535
549
Advertisement
Table of Contents
