Bridge Port Starts Table Commands; Get Bridge Port Stats; Reset Bridge Port Stats - Planet IP DSLAM IDL-2400 User Manual

5.6.6 Bridge Port Starts Table Commands

5.6.6.1 Get bridge port stats

Description:
Use this command to get the statistics of a single port, or all the ports.
Command Syntax:
get bridge port stats [portid <portid-val>]

5.6.6.2 Reset bridge port stats

Description:
Use this command to reset bridge port statistics.
Command Syntax:
reset bridge port stats portid <portid-val>
Parameters:
Name
portid
<portid-val>
Example:
$ get bridge port stats portid 1
Output:
Verbose Mode On
PortId
Out Frames
In Discards
HC In Frames
HC Out Frames
HC In Discards
IP DSLAM
Description
This is the bridge port identifier. If this is not specified in
the get command, then information for all ports is
displayed.
Type : Get － Optional
Reset － Mandatory
Valid values : 1- 578
: 1 Max Info Size
: 138 In Frames
: 3
: 300
: 350
: 400
: 1500
: 129
181