Get Rmon Netbuf Threshold - Planet IP DSLAM IDL-2400 User Manual

5.22.5.2 Get rmon netbuf threshold

Description:
Use this command to get the critical events logged for the netbuffer. This
command will display 20 entries(maximum). Events are logged for netbuffer in the
following 3 cases:
Allcation of net buffer failed.
Threshold Hit.
Command Syntax:
get rmon netbuf threshold
Parameters:
None
Example:
$ get rmon netbuf threshold
Output:
Task Name : TSK1
ThresholdHitTimeStamp : Thu Jan 01 00:00:39 1970
Event Type :
Output field:
Field
Task Name
ThresholdHitTimeStamp
Event Type
578
Allocation Fail
Description
The name of Task which tries to allocate the
netbuffer during a critical event.
The system time when event logging is done.
Cause of event logging.
Its value can be:
Allocation Fail - If allocation of net buffer has
failed.
Threshold Hit - If threshold value of net buffer
has been hit while allocation.
IDL series User Guide