Bridge Port Prioinfo Commands; Get Bridge Port Prioinfo; Modify Bridge Port Prioinfo - Planet IP DSLAM IDL-2400 User Manual

5.2.2 Bridge port prioinfo Commands

5.2.2.1 Get bridge port prioinfo

Description:
Use this command to get.
Command Syntax:
get bridge port prioinfo [portid <portid-val >]

5.2.2.2 Modify bridge port prioinfo

Description:
Use this command to modify.
Command Syntax:
modify bridge port prioinfo portid portid [defprio <defprio-val>] [numtrfclass
<numtrfclass-val>] [defsvprio <defsvprio-val>]
Parameters:
Name
portid <portid>
defprio <defprio-val>
numtrfclass
<numtrfclass-val>
defsvprio
<defsvprio-val>
Example:
$ get bridge port prioinfo portid 1
IP DSLAM
Description
Port number of the port for which this entry contains bridge
management information.
Type: Modify -- Mandatory
Get -- Optional
Valid values: 1 - 386
The default ingress User Priority which can be configured by
the user.
Type: Modify － Optional
Valid values: 0 - 7
The number of egress traffic classes supported on this port.
Type: Modify － Optional
Valid values: 1 - 8
Not supported
Type: Modify Optional
Valid values: 0 - 7
115