Table of Contents
Advertisement
Output field:
Field
Tree Name
Status
Description
TreePriority
5.13.12 Clfr tree map Commands
5.13.12.1 Get clfr tree map
Description:
Use this command to get.
Command Syntax:
get clfr tree map [ifname <interface-name>]
5.13.12.2 Create clfr tree map
Description:
Use this command to create.
Command Syntax:
create clfr tree map ifname <interface-name>tname <tname-val> entrypid
<entrypid-val>
5.13.12.3 Delete clfr tree map
Description:
Use this command to delete.
Command Syntax:
delete clfr tree map ifname <interface-name>
360
Description
Name of the classifier tree
A tree cannot be deleted or modified, if it is enabled. A tree can only be
used, if it is enabled. A tree can not be disabled, if it is being used.
A brief description can be given with tree, to identify the tree
Tells the priority of the tree. Based on this priority value, the tree is
created in fast or slow memory.
IDL series User Guide
Advertisement
Table of Contents
