Table of Contents
Advertisement
srcipaddr
<srcipaddr-val>
vlanid <vlanid-val> |
none
mcastvlanstag
<mcastvlanstag-val> |
none
mcastvlanctag
<mcastvlanctag-val> |
invlan | none
IP DSLAM
This parameter specifies the source IP address of the
Multicast Server. The source address and destination group
address together define a multicast stream. In case of value
0, this parameter is ignored while determining Multicast
Vlan.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
This parameter specifies the Dot1q tag of an IGMP packet
received. This will be PVID in case an untagged IGMP
packet was received. In case of value 0, this parameter is
ignored while determining Multicast Vlan.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 4095
Additional Values: 0
This parameter specifies the Multicast SVlanId to be used
in case of stacked mode. In the native mode, this parameter
is not applicable.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 - 4095
Additional Values: 0
This parameter specifies the Multicast CVlanId to be used.
Two special values of this parameter are supported in
stacked mode: One value (4097) to signify that repot/leave
shall be forwarded to querier with the C tag with which it was
received from the subscriber port and the S tag specified in
multicast Vlan's definition One value (0) to signify that
report/leave shall be forwarded to querier with S tag
specified in multicast Vlan's definition and no C tag. Other
Value shall signify that, report/leave shall be forwarded to
querier with S and C tag specified in multicast Vlan's
definition.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 -4095
Additional Values: 0, 4097
453
Advertisement
Table of Contents
