Table of Contents
Advertisement
5.25.9 System Stats Commands
5.25.9.1 Get system stats
Description:
Use this command to view System Statistics.
Command Syntax:
get system stats
5.25.9.2 Reset system stats
Description:
Use this command to reset System Statistics.
Command Syntax:
reset system stats
Example:
$ get system stats
Output :
Verbose Mode On
Verbose Mode On
CPE Ucast Addr Count
NET Ucast Addr Count
IP DSLAM
contains information about the routes in the system. Each RID
identifies a flow and defines route related information for that
flow. The RID defines a flow based on the VLAN Id. The
database can be of 2 types, IRD( Independent Routing
Database) where there are more than one RIDs in the system
and each RID defines separate routes in context of itself. If
VlanId <X> and RID <X> have been created and the routing
database is configured for IRD, than routes in RID <X> shall
define flow for packets coming on VLAN Id <X>. The other
mode for the database is SRD( Shared Routing Database)
where there is a single RID in the system and all flows map to
this RID. This RID has to be explicitly created and no more than
1 RID can be created in the system in this mode. Flows for all
created VLANs shall map to this RID for routing.
: 10
: 20
DnLink Ucast Addr Count : 80
CPE Learn Entry Discards : 90
627
Advertisement
Table of Contents
