5.5.3 ATM OAM Loopback Commands
5.5.3.1 Get oam lpbk vc
Description:
Use this command to get.
Command Syntax:
get oam lpbk vc [ifname <interface-name>]
5.5.3.2 Modify oam lpbk vc
Description:
Use this command to modify.
Command Syntax:
modify oam lpbk vc ifname <interface-name> [e2e | seg] [lbid <lbid-val>]
Parameters:
Name
ifname
<interface-name>
e2e | seg
Lbid < lbid-val>
Example:
$ get oam lpbk vc ifname aal5-0
Output:
IfName
LB Type
OAM Location Id : 0xffffffffffffffffffffffffffffffff
OAM LB Result
IP DSLAM
Description
Interface Index of the ATM port, on which this VC is getting
configured.
Type: Modify - Mandatory
Get - Mandatory
This specifies the loop back type used. It may be: e2e or segment.
Type: Modify - Optional
This defines the loopback site, which will loopback the cell.
Type: Modify - Optional
: aal5-0
VPI : 1
: e2e
: E2e Succeeded
VCI : 1
157