Trace Log Statistics Commands; Get Trace Stats - Planet IP DSLAM IDL-2400 User Manual

Verbose Mode Off
Set Done
Output Fields:
FIELD
Module
Flow
Level
Type
Destn
Port
References:
get trace cfg command
get trace stats command.

5.25.14 Trace Log Statistics Commands

5.25.14.1 Get trace stats

Description:
Use this command to display trace statistics.
Command Syntax:
get trace stats
Parameters:
None
640
Description
This specifies the module for trace/log config whose
information is being displayed: It can be : GCOS,OAM,
CIN, GAG, CDB, CLI, ATM, EOA, TBG, DSLME, NVM,
FFC, DNCD, DATAME, GARP, GVRP, LACP
This indicates a Hexadecimal bitmask, which sets the
filter for trace flow.
This indicates a Hexadecimal bitmask, which sets the
filter for trace level.
This specifies the type of logging to be done. It may be:
Syslog, Net, Stdout
This specifies the IP address for host for logging for
trace type syslog and net. It is invalid incase of trace
type stdout
Port number on which host is listening for trace info to be
logged incase of trace type syslog and net. It is invalid
incase of trace type stdout
IDL series User Guide