Other Commands - Planet IP DSLAM IDL-2400 User Manual

5.28.2 Other Commands

Description:
Use this command to create an alias for any CLI command. You can later call this
command by using the alias-string along with any additional parameters, which
you need to specify. It will display a list of all the aliases currently defined if no
parameter is given.
Command Syntax:
alias [alias-string = aliased-command]
Parameters:
Name
alias-string
aliased-command
Mode:
Super-User, User
Output:
With Parameters
$alias abc = modify nbsize
Set Done
$abc maxatmport 48
Set Done
Without Parameters
$alias
Alias
---------------------------
abc
IP DSLAM
Description
The string, which you will use to refer to the aliased command,
henceforth. It should not match any CLI keyword.
Type: Optional
Valid values: string of up to 14 characters ('A'-'Z', 'a'-'z', '0'-'9', '-', '_')
This is the total CLI command length (512 characters).
Type: Mandatory
Valid values: Any string (all printable characters except ';') as long as
the total CLI Command length is not exceeded.
Command
modify nbsize
687